SK509 5W Industrial 4 Channels Wireless Remote Control Switch Module

SKU: SK509-001
0.0 (0)
0 Sold
$132.00 $220.00
SK509 is an industrial four channels wireless switch control module with pairing function, it provides maximum four channel signal input and maximum four channel control output.
Received successfully
Coupon Code
CONTINUE SHOPPING
Quantity:
  • SK509 5W Industrial 4 Channels Wireless Remote Control Switch Module
  • Description
  • SK509 is an industrial four channels wireless switch control module with pairing function, it provides maximum four channel signal input and maximum four channel control output. It features in simple interface and reliable performance. The parameters can be modified by PC software / UART command / remote controller (SK509-S). DIP switch on the module can used to change operating frequency (maximum 16 group), operation mode etc. Using this module, user can replace wired device with the wireless connection, which significantly reduce the cost and save much time.
  • SK509 strictly uses lead-free process for production and testing, and meets RoHS and Reach standards.

Features

  • Distance up to 8Km in open area
  • 16 channels to choose
  • Parameters set wirelessly by PC
  • Real time / Timing mode
  • GFSK modulation
  • Antenna matches automatically
  • Bi-directional switch control
  • Sensitivity up to -121 dBm
  • output power:5 W
  • Working voltage: 9~30 V
  • Working temperature:-40 ~ +85 °C
  • Weight:180g

Application

  • Remote switch control
  • Security system
  • Home automation remote sensing
  • Wireless remote telemetry
  • Building automation and security
  • Access Control System
Parameter Min Typ. Max Unit Condition
Condition
Working voltage 9 12 30 V  
Working temperature -40 25 +85  
Current Consumption
Rx current   <20   mA  
Tx current   <2   A  
Standby current   <5   mA @12V timing mode Master don’t send message
RF Parameters
Output power   37   dBm  
Sensitivity   -121   dBm @2400
 

Typical application 

SK509 Typical application
 

 

Pin definition

 

SK509 Pin Definition

Pin NO. Pin Description
1 GND Connect negative power
2 VCC Connect positive power
3 IN1 Ch1 switch input, internal pull up
4 GND
5 IN2 Ch2 switch input, internal pull up
6 GND
7 IN3 Ch3 switch input, internal pull up
8 GND
9 IN4 Ch4 switch input, internal pull up
10 GND
11 NC Reserved, Non-Connected
12 NC Reserved , Non-Connected
13 OUT1 Ch1 relay output
14
15 OUT2 Ch2 relay output
16
17 OUT3 Ch3 relay output
18
19 OUT4 Ch4 relay output
20

 

Mechanical dimension

 

SK509 Mechanical Dimensions

Datasheet Download

//ueeshop.ly200-cdn.com/u_file/UPAV/UPAV365/2108/photo/16488a557f.jpg

 

The difference between wireless switch module SK108, SK109, SK509

There are three types of NiceRF wireless remote four-way wireless switch modules: SK108, SK109, SK509. These three switch modules are mainly used in security systems, wireless remote control telemetry, building community automation in security, access control systems, switch remote control, and home Automated telemetry. Next, make a table to analyze the differences between them.

Product number SK108 SK109 SK509
Transmit power 1W 1.5W 5W
Operating Voltage 9~18V 9~18V 9~30V
Emission current <20mA <20mA <20mA
Receive current <200mA <300mA <2A
Working frequency 433/470/868/915MHz 433/470/868/915MHz 433/470MHz
Receiving sensitivity -121dBm -121dBm -121dBm
Channel 16 16 16
Modulation GFSK GFSK GFSK
Transmission distance 2500m 3200m 7000m
Volume 115*96*40mm 115*96*40mm 115*96*40mm

 

SK108, SK109, and SK509 are industrial-grade remote four-channel wireless switch control modules, which provide four-channel signal input and four-channel control output interface. It has the characteristics of a simple interface and reliable work. Users can also configure and modify relevant parameters inside the module wirelessly in conjunction with the friendly PC interface.

 

The difference between wireless switch modules SK108, SK109, SK509

  1. The transmit power is different. SK108 transmitting power is 1W, SK109 transmitting power is 1.5W, and SK509 transmitting power is 5W.
  2. The working voltage is different. The working voltage of SK108 and SK109 is 9~18V, and the working voltage of SK509 is 9~30V.
  3. The receiving current is different. SK108 receiving current <200mA, SK109 receiving current <300mA, SK509 receiving current <2A.
  4. The working frequency is different. The working frequency of the SK108 and SK109 switch modules can be 433/470/868/915MHz, and the working frequency of SK509 can be 433/470MHz.
  5. Transmission distance: SK108 transmission distance is 2.5 kilometers, SK109 transmission distance is 3.2 kilometers, and SK509 transmission distance is 7 kilometers (in an open environment).

The parameters of the SK108, SK109, and SK509 switch modules are the same in transmitting current, receiving sensitivity, channel, modulation mode, and volume.

 

Which is better, SK108, SK109, SK509, how to choose the right wireless switch module?

The wireless switch module developed and produced by Shenzhen NiceRF Wireless Technology Co., Ltd. complies with the standard in terms of module quality and craftsmanship, so there is no need to worry about product quality. You can choose the appropriate switch module from your actual project, and you can consider the transmission distance, power, and cost budget of the project.

CUSTOMER REVIEWS
0.0 0 Reviews
Write a review
Frequently Bought Together
more
Frequently Bought Together
$0.00 $0.00
Please choose options.Back to top
Close
$0.00 $0.00
Message Us