AL001 ALTERA FPGA development board Cyclone IV 【Premium Kit】NIOS EP4CE6 256Mbit SDRAM

SKU: AL001-ALTERA-FPGA-Premium
0.0 (0)
0 Sold
$569.00 $955.00
The AL001 development board provides a complete hardware environment for designers to accelerate their time to market.The kit delivers a stable platform to develop and test designs targeted to the low-cost and low-power EP4CE6F17C8 FPGA. The installed EP4
Received successfully
Coupon Code
CONTINUE SHOPPING
Quantity:
  • AL001 ALTERA FPGA development board Cyclone IV 【Premium Kit】NIOS EP4CE6 256Mbit SDRAM
  • Description

Description

 

The AL001 development board provides a complete hardware environment for designers to accelerate their time to market.The kit delivers a stable platform to develop and test designs targeted to the low-cost and low-power EP4CE6 FPGA. The installed EP4CE6 device offers a prototyping environment to effectively demonstrate the enhanced benefits of low-cost Cyclone IV FPGA solutions. Reference designs are included with the kit to exercise standard peripherals on the evaluation board for a quick start to device familiarization.

Tupianku Image Hosting Service
The AL001 development board contains the following individual pieces:
The AL001 development board
USB 2.0 cable
Example Source Code
●AL001 Development Board Users Manual
Transparent protection board
Please note that this kit does NOT include a FPGA programming cable.

Block Diagram

Figure 1 gives the block diagram of the AL001 development board. To provide maximum flexibility for the user, all connections are made through the EP4CE6 FPGA device. Thus, the user can configure the FPGA to implement any system design.

//ueeshop.ly200-cdn.com/u_file/UPAV/UPAV365/2112/photo/8433c2a070.jpg
Figure 1.Block Diagram

 

AL001 Resource


Following is more detailed information about the blocks in Figure 1:
FPGA
ALTERA EP4CE6 FPGA
JTAG Port
On-board JTAG Port for programming
SDRAM
 256Mbit SDRAM
SPI Flash memory
 16Mbit FLASH
Camera Port
 Port for OV5640 module
Pushbutton switches
4 User Keys
General User Interfaces
4 User LEDs
6-digit 7-segment displays
 Buzzer
General Interfaces
7” TFT Interface(AT070TN83)
System Clock inputs
50MHz oscillator
RTC Module
Comes with a CR1220 battery socket
External Eeprom
Comes with a 24LC04;
VGA output
Uses a 16-bit resistor-network DAC under RGB65536 Mode
With 15-pin high-density D-sub connector
Voltage Regulator Circuit
Provides 1.2V,5V and 3.3V for system power supply
SD Card
Equips a SD card holder.
On-board USB to TTL/RS232 Module
Use CP2102 for USB-TTL/RS232 Converting (Without DB-9 serial connector)
40-PIN Expansion Headers
Two 40-PIN Expansion Headers Cyclone IV I/O pins, as well as 3 power and ground lines, are brought out to the 40-pin expansion connectors.

What's on board

Tupianku Image Hosting Service

More Kits Optional

//ueeshop.ly200-cdn.com/u_file/UPAV/UPAV365/2112/photo/e3ff33078b.jpg

//ueeshop.ly200-cdn.com/u_file/UPAV/UPAV365/2112/photo/0e6349765d.jpg
//ueeshop.ly200-cdn.com/u_file/UPAV/UPAV365/2112/photo/9658a02ade.jpg
//ueeshop.ly200-cdn.com/u_file/UPAV/UPAV365/2112/photo/8f15a4f842.jpg
//ueeshop.ly200-cdn.com/u_file/UPAV/UPAV365/2112/photo/746edb3ac8.jpg
//ueeshop.ly200-cdn.com/u_file/UPAV/UPAV365/2112/photo/88cc8b832f.jpg

//ueeshop.ly200-cdn.com/u_file/UPAV/UPAV365/2112/photo/84f81a6ec6.jpg

//ueeshop.ly200-cdn.com/u_file/UPAV/UPAV365/2112/photo/d7ffc18d7f.jpg

//ueeshop.ly200-cdn.com/u_file/UPAV/UPAV365/2112/photo/2a6f4b268b.jpg

More Modules for Equiping Your FPGA Board

Tupianku Image Hosting Service


1) 01_AL001_Schematic.rar
2) 02_AL001 Cyclone IV Development Board Users Manual.rar
3) 03_Demo.rar
4) 04_Datasheet.rar
5) 05_Modules.rar
6) 06_Others.rar
7) 07_nios.rar
 

//ueeshop.ly200-cdn.com/u_file/UPAV/UPAV365/2109/photo/87f9026ecc.jpg

 

CUSTOMER REVIEWS
0.0 0 Reviews
Write a review
Frequently Bought Together
more
Frequently Bought Together
$0.00 $0.00
Please choose options.Back to top
Close
$0.00 $0.00
Message Us