1.1 Function overview
USBCAN-II FD is a high performance bus communication interface card which
integrates two CANFD interfaces. This model of CAN card conforms to the USB2.0
bus high-speed specification, has two independent CAN/CAN FD channels, and the
signals are isolated from each other. PC can be quickly connected to CAN (FD)-bus
network through USB interface to form CAN (FD)-bus network control nodes for data
processing and data acquisition in CAN (FD)-bus network, such as field bus
laboratory, industrial control, automotive electronic network and so on.
USBCAN-II FD high-performance CAN interface card is a powerful tool for CAN
(FD)-bus product development and CAN (FD)-bus data analysis. At the same time, it
has the characteristics of compact size, plug and play and so on. It is also the best
choice for portable system users. The USBCAN-II FD interface card has its own USB
interface and integrates the CAN interface electrical isolation protection module to
avoid damage to the equipment due to instantaneous overcurrent / overvoltage and
enhance the reliability of the system in bad environment.
USBCAN-II FD high-performance CAN interface card supports 32-bit / 64-bit
Windows operating systems such as Windows XP, 7, 8, 10, etc. Our company
provides users with a unified application programming interface and complete
application demonstration code, and there is a demonstration of development routines,
which is convenient for users to develop application programs.The USBCAN-II FD
interface card can use the ECANTools general test software developed by our
company, which can perform the functions of sending and receiving and monitoring
CAN (FD)-bus messages.
1.2 Performance characteristics
The PC interface conforms to the USB 2.0 full speed specification and is
compatible with USB 1.1 and USB 3.0;
Integrated 2-way CANFD interface, using plug-and-pull terminal connection ;
CAN2.0 A/B protocol is supported and conforms to ISO 11898-1 specification;
Communication baud rate is arbitrarily programmable between 1Mbps~5Mbps;
Use USB bus power supply, or use external power supply (DC+5V,130mA);
Bus interface is electrically isolated, the module insulation voltage is DC 2500V
The maximum received data flow is 14000 fps;
The accuracy of message timestamp received by the receiver CAN can reach 1us;
Supported Windows XP, 7, 8, 10 and other Windows operating systems;
Support ECANTools testing software;Support secondary development;
1.3 Typical application
Automotive Electronics in CAN (FD)-bus Network diagnosis and testing.
Electric power communication network.
Industrial control equipment.
Communication with high speed and large amount of data