SV6300 is an ultra long distance & highly-integrated RF transceiver module, which adopts the high performance Si4432 from Silicon Labs and industrial micro-controller. TTL / 232 /485 can be chose corresponding to SV6300-TTL / SV6300-232 / SV6300-485. SV6300 has good sensitivity and 1W output power to achieve long RF range and reliable RF communication. To avoid the interference, SV6300 provides 40 frequency channels and configurable Net ID. SV6300 is flexible but easy to use, it comes with many parameters, such as: frequency, data rate, output power, Net ID, Node ID. Users can configure the parameters through PC or customer’s own device.
Feature
Frequency:433/470 MHz
Industrial class
40 channels
4 bytes Net ID & 2 bytes Node ID
Series Data Rate: 1200 ~ 115200 bps
Air Data Rate: 1200 ~ 115200 bps
GFSK modulation
RSSI
Parameters save automatically
Interface: TTL/RS232/RS485
Bi-directional & Half duplex
Sensitivity: -121 dBm
Max output power: 3W （+35 dBm）
Working voltage: 9~18.0V
Working temperature: -40 ~ +85 °C
Weight: 160 g
Application
Remote control telemetry
Security system
Industrial data acquisition
Home automation
Wireless data communication
Access system
Robot control
Wireless PC peripherals
| Parameters | Min. | Typ. | Max. | Unit | Condition |
| Working Condition | |||||
| Voltage range | 9 | 12 | 18.5 | V | |
| Operating Temperature | -40 | 25 | +85 | ℃ | |
| Current Consumption | |||||
| Rx current | <30 | mA | |||
| Tx current | <600 | mA | @34.7dBm | ||
| Sleep current | ＜5 | uA | @TTL Level | ||
| RF Parameters | |||||
|
Frequency range |
414.92 | 433.92 | 453.92 | MHz | @433MHz |
| 470.92 | 490.92 | 509.92 | MHz | @490MHz | |
| Data rate | 1.2 | 9.6 | 115.2 | Kbps | GFSK |
| Output power | 15 | / | +35 | dBm | |
| Sensitivity | -121 | dBm | @1.2Kbps | ||
Application circuit
Pin definition
| Pin No. | Definition | Description |
| 1 | TXD | TXD of the module and connect to external RXD |
| 2 | RXD | RXD of the module and connect to external TXD |
| 3 | GND | Connected to ground |
| 4 | A+ | Connect to A+ for RS485 interface |
| 5 | B- | Connect to B- for RS485 interface |
| 6 | SET | Configuration mode enable (low to enter into the setting mode, leave open or connect high level to exit setting mode) Valid when CS Pin is high or leave open. |
| 7 | CS | For the default version of the module, this pin needs to be left floating (the module has a built-in anti-crash self-reset circuit) Note: Customers can customize the sleep version of the program (without self-reset function), low level sleep, current lower than 5uA, default high level output. |
Mechanical dimension
