- The LoRa Pro module is a new series of upgraded networking wireless communication modules from Wireless. It is based on Semtech's SX127X chip and uses advanced LoRa spread spectrum modulation frequency hopping technology to achieve high sensitivity. The penetrating power and communication distance are far superior to the current FSK and GFSK products, and have stronger anti-interference. In order to meet the application needs of different customers, we design the module software of this series as an all-in-one way. Users can switch between different working modes through the PC software configuration module. In MESH mode, the routing module has automatic routing. Function, the user can form a network transmission without blind zone without distance limitation by means of multi-module combination. At the same time, users can also encrypt AES128 wireless data through PC software or serial port instructions, making data transmission more secure.
- The LoRa6100Pro module is designed for 1w output power and is available in TTL/RS232/RS485 levels. It is widely used in wireless remote transmission control.
- LoRa6100Pro strictly uses lead-free process for production and testing, and meets RoHS and Reach standards.
Features
- Transmission distance in the open area up to 10km @ 91bps
- Frequency band: 433/470/868/915 MHz for option
- AES128 Data encryption
- MESH & Node working mode
- 40 channels
- LoRa modulation
- Interface: TTL/RS232/RS485
- Sensitivity: -139 dBm
- Max output power: 1W（+30dBm）
- Working voltage: 3.3 ~ 6.5 V
- Working temperature: -40 ~ +85 °C
Applications
- Remote control
- Remote meter reading
- Industrial data collection
- Home automation telemetry
- Wireless data communication
- Access control system
Electrical Characteristics
Pin definition:
| Pin No. |
Definition |
Description |
| 1 |
VCC |
Connected to the positive power supply (typical 5V) |
| 2 |
GND |
Connected to ground |
| 3 |
TXD/A |
connect to A@485 |
| 4 |
RXD/B |
connect to B@485 |
| 5 |
SET |
Configuration parameter enable (low level enable parameter configuration, default high level output) |
| 6 |
CS |
Module enable pin (built-in pull-up) Note: Default factory version: sleep current <200uA, CS pulled high or suspended for normal communication, sleep at low level; Low power consumption version: sleep current <15uA, normal communication when CS is pulled low, pull high or float to sleep. |
Mechanical dimension:
Datasheet Download
