Beacon600 Embedded Beacon UART Module Ble4.0 2.4GHz wireless transceiver module

Name: Beacon600 Embedded Beacon UART Module Ble4.0 2.4GHz wireless transceiver module
Brand: MicroHello
SKU: Beacon600-001
Price: 11 USD
Availability: InStock

SKU: Beacon600-001

0.0 (0)

0 Sold

$11.00 ~~$45.00~~

Beacon600 is the latest 2.4GHz wireless transceiver module which is compatible with BLE. This module integrates the MCU and process the SPI protocol. It provides generic UART interface, users can connect the module with smart phone with BLE. This module h

Received successfully

Coupon Code

CONTINUE SHOPPING

Add to Favorites (0)

Description

Beacon600 is the latest 2.4GHz wireless transceiver module which is compatible with BLE. This module integrates the MCU and process the SPI protocol. It provides generic UART interface, users can connect the module with smart phone with BLE. This module has the same structure of BLE, and works as Broadcast mode of Bluetooth. It is easier and cost-effective compare with Bluetooth.
1. Beacon module adopts Ble protocol, which can communicate with BLE module and smart mobile phone,
2. Farther than BLE distance,
3. Broadcast communication can be peer to pear, many-to-many, and there is no limit on the number.
4. Uart interface with MCU on board,transparent transmission. no need to debug and firmwaer writing.

Features

Communicate by the Bluetooth broadcasting mode and scanning mode.
Serial transparent transmission, adjustable parameters
1M bps on-air data rate
Output power up to +3 dBm
Embedded and small size
Low power consumption and cost-effective

Applications

iBeacon or AltBeacon
Wireless health sports products
Commodity information push
Wireless remote sensing
Alarm security system
Wireless ranging system

Parameters	Min.	Typ.	Max.	Unit	Condition
Working Condition
Voltage range	2.8	5.0	6.5	V
Operating Temperature	-40	25	+85	℃
Current Consumption
Rx current		20		mA
Tx current		19		mA
Sleep current		11		uA
RF Parameters
Frequency range	2.4	-	2.484	GHz
Serial baud rate	1200	9600	115200	bps
Tx power	-18	-	+3	dBm	Configurable

Typical Application Circuit

Beacon600 Typical application circuit

Pin Definition

Beacon600 Pin definition

Pin NO.	Pin name	Description
1	VCC	Connected to the positive power supply (typical 5V)
2	GND	Connected to ground
3	TXD	TXD of the module and connect to external RXD
4	RXD	RXD of the module and connect to external TXD
5	SET	Configuration mode enable (low to enter into the setting mode, leave open or connect high level to exit setting mode) Valid when CS Pin is high or leave open.
6	CS	Module working Enable（Low level for sleep, current will be less than 40uA, default high level）.
7	NC
8	GND	Connected to ground
9	GND	Connected to ground